Skip to content

Registered electricians & solar installers across Gauteng

084 412 1814 Mon–Fri 07:00–17:00, Sat 08:00–13:00, 24/7 emergency callouts

Electrician in Randburg, Gauteng

Randburg · City of Johannesburg

Electrician in Randburg

Registered, insured electricians covering Randburg and the rest of Johannesburg — fault finding, DB boards, COCs and 24-hour emergency callouts.

  • Work done to SANS 10142-1 by a registered person
  • Same-day callouts in Randburg
  • Written quote before any work starts
Call 084 412 1814

Get a quote for Randburg

Send us the details and we come back with a time and a price.

Or call 084 412 1814 — we answer after hours for emergencies.

Registered & compliantWork carried out under a registered person to SANS 10142-1, the South African wiring code.
Same-day & 24/7 calloutsEmergency response around the clock, and same-day slots for standard work wherever possible.
Prices before work startsA written quote up front. No open-ended hourly work and no surprises on the invoice.
COC on completionCertificates of Compliance issued for every job that requires one, with test results attached.

Randburg keeps us busy. Between tripping earth leakage units, failed DB boards and the wiring faults that come with a broad, mostly residential belt of 1960s–80s freestanding homes now mixed with townhouse complexes and busy neighbourhood retail strips, we are in this part of Johannesburg most weeks. Every job is done to SANS 10142-1 and signed off by a registered person.

Randburg is defined by a broad, mostly residential belt of 1960s–80s freestanding homes now mixed with townhouse complexes and busy neighbourhood retail strips, and the electrical work follows from that.

Electricity in Randburg is distributed by City Power. Your responsibility as the owner starts at the point of supply and covers everything inside it — the board, the circuits, the earthing and the fittings. That is the part we look after, and the part a Certificate of Compliance speaks to.

Electrician services we provide in Randburg

Fault finding & fault repairs

Tripping breakers, earth leakage that will not reset, dead circuits, burning smells and partial power loss — traced properly with test instruments, not guesswork.

DB board upgrades & replacements

Replacing overloaded, obsolete or unsafe distribution boards, adding earth leakage protection and correctly labelling every circuit.

Certificates of Compliance (COC)

Full installation inspection, testing and a valid COC issued by a registered person — including the repairs needed to get you there.

Plug points, lights & switches

New points, extra circuits, LED conversions, dimmers, outdoor and security lighting, and replacing damaged fittings.

Stove, geyser & appliance connections

Dedicated circuits and isolators for stoves, ovens, geysers, pool pumps, boreholes and heat pumps.

Earth leakage & surge protection

Testing and replacing earth leakage units, adding surge protection at the board to protect electronics against spikes.

Rewiring & new installations

Partial or full rewires for older properties, and complete first-fix and second-fix installations for new builds and renovations.

Emergency callouts, day or night

No power, exposed conductors, burning smells or water on the board — we prioritise anything that is a safety risk.

What we see in Randburg

Installations that have outlived their design

The wiring in much of Randburg was designed for a household that had a stove, a geyser and a television. It is now running heat pumps, pool equipment, home offices, backup systems and a dozen always-on devices. Nothing has failed exactly — it has simply been asked to do a job it was never specified for, and the distribution board is usually where that shows first.

Fit-outs, tenants and handovers

Commercial space in Randburg changes hands often, and each tenant leaves something behind — a data run, an extra circuit, a sign supply nobody documented. When we take on a fit-out we establish what is actually there before adding to it, so the next handover is cleaner than the last one was.

Loads that punish a weak connection

Motors, compressors, welders and refrigeration plant in Randburg draw hard on start-up and expose every marginal termination in the installation. A connection that is merely tight enough will survive a domestic load for years and fail on a factory floor in months, which is why thermal scanning under load finds problems that a visual inspection never will.

How it works in Randburg

  1. 1

    Call or send a message

    Tell us what is happening. We will tell you whether it is urgent and what it is likely to involve.

  2. 2

    Arrival window you can plan around

    A real time slot, and a call when the electrician is on the way.

  3. 3

    Diagnose & quote

    We find the actual fault and price the repair before we carry it out.

  4. 4

    Fix, test & certify

    The repair is tested on completion, and a COC is issued where the work requires one.

Electrician in Randburg — your questions answered

How quickly can you get an electrician to Randburg?

We cover Randburg as part of our Johannesburg area, so we can normally be with you the same day for standard work and within hours for genuine emergencies. Call 084 412 1814 and we will give you a realistic arrival window rather than a vague promise.

Are you registered to work in Randburg?

Yes. All electrical work is carried out under a registered person in terms of the Electrical Installation Regulations, and all installations are done to SANS 10142-1 — the wiring code of practice for South Africa. That is what allows us to issue a valid Certificate of Compliance.

What does a callout to Randburg cost?

We quote before we start. For fault finding there is a callout and diagnostic fee, and once we know what is wrong you get a price for the repair — you decide whether to go ahead. No work happens on an "we will see what it comes to" basis.

Do you work after hours and on weekends in Randburg?

Yes. We run a 24-hour emergency line for situations that cannot wait — no power to the property, burning smells, sparking, exposed conductors or water damage to an electrical installation. After-hours rates apply and we tell you what they are when you call.

Will I get a Certificate of Compliance?

For any work that requires one, yes. A COC can only be issued by a registered person after the installation has been inspected and tested. If your installation needs repairs before it can be certified, we quote those separately so you can see exactly what you are paying for.

Do you supply the materials?

We carry common parts — breakers, earth leakage units, points, fittings and cable — on the vehicle so most jobs are finished in one visit. Specialised items are quoted and ordered, and you are welcome to supply your own materials if you prefer, though we can then only guarantee our workmanship.

Other services we provide in Randburg

Everything below is available in Randburg from the same team, on the same terms.

Residential Electrician

Home electrical work done safely and signed off properly

Learn more

Commercial Electrician

Electrical contractors for offices, retail and hospitality

Learn more

Industrial Electrician

Plant, motors and three-phase distribution

Learn more

Solar Installation

Grid-tied, hybrid and off-grid solar, installed and certified

Learn more

Backup Power & Inverters

Inverters, batteries and generator changeover

Learn more

Electrical COC Certificate

Inspection, testing and certification by a registered person

Learn more

Emergency Electrician

24-hour callouts for electrical emergencies

Learn more

Electrician elsewhere in Gauteng

We cover these areas from the same base, so response times are similar.

Need electrician in Randburg?

Call now for an arrival time, or send the details and we will quote you.

Call 084 412 1814
Call now WhatsApp Get a quote