Soshanguve · City of Tshwane
Solar Installers in Soshanguve
Grid-tied, hybrid and off-grid solar systems for Soshanguve — properly sized, compliantly installed, COC issued and SSEG registration handled for you.
- Work done to SANS 10142-1 by a registered person
- Same-day callouts in Soshanguve
- Written quote before any work starts
Solar in Soshanguve is no longer about surviving load shedding — it is about what you pay Eskom and City of Tshwane Electricity every month. Done properly, a correctly sized system pays for itself. Done badly, it becomes an expensive roof ornament with a compliance problem attached.
Soshanguve is defined by the large northern townships of Tshwane — dense residential housing, university campuses and a fast-growing small-business sector, and the electrical work follows from that.
Electricity in Soshanguve is distributed by Eskom and City of Tshwane Electricity. Your responsibility as the owner starts at the point of supply and covers everything inside it — the board, the circuits, the earthing and the fittings. That is the part we look after, and the part a Certificate of Compliance speaks to.
Solar Installation services we provide in Soshanguve
Consumption-based system design
We work from your actual usage profile — bills, tariff and load pattern — to size panels, inverter and battery. No guessing, no one-size-fits-all packages.
Grid-tied solar
Offsets your daytime consumption and cuts your bill. Requires SSEG registration with your supply authority.
Hybrid solar with battery backup
The most popular option in Gauteng: solar by day, battery through outages, grid as the fallback.
Off-grid systems
For smallholdings and properties with poor or no supply — sized with real autonomy margins, not best-case numbers.
Inverter & battery installation
NRS-compliant inverters, lithium battery banks, correct DC and AC protection, isolation and labelling.
Mounting & roof work
Rail systems suited to your roof type, with penetrations correctly sealed and cable runs protected from UV.
Electrical COC for the installation
A Certificate of Compliance is legally required for a solar installation regardless of its size. We test, certify and hand over the paperwork.
SSEG / municipal registration support
Grid-tied systems must be registered with your supply authority. We prepare the documentation — single-line diagram, inverter certificates, COC — and guide the application.
What we see in Soshanguve
Pressure on the local network
Density in Soshanguve means the network itself works hard, particularly on winter evenings. That matters for diagnosis: low or fluctuating voltage arriving at the property is a supply-side problem, and no amount of work inside your board will fix it. We measure first and tell you honestly which side of the meter the problem is on.
Loads that punish a weak connection
Motors, compressors, welders and refrigeration plant in Soshanguve draw hard on start-up and expose every marginal termination in the installation. A connection that is merely tight enough will survive a domestic load for years and fail on a factory floor in months, which is why thermal scanning under load finds problems that a visual inspection never will.
Compliance that someone will eventually ask for
Landlords, insurers and lease renewals in Soshanguve all eventually ask the same question: where is the current Certificate of Compliance, and does it cover the work the tenant did? Getting that documented while the premises are trading normally is considerably cheaper than assembling it under pressure after an incident.
The compliance side, explained plainly
Two documents decide whether a solar or inverter installation in Soshanguve is legal, insurable and safe to leave running. Most of the complaints we are called in to fix come down to one of them being missing.
An electrical Certificate of Compliance
Required for every solar or inverter installation regardless of size, because connecting one alters your electrical installation. It is also the first document an insurer asks for after a fire or lightning claim. Only a registered person may issue it, and only after testing the installation.
SSEG registration with Eskom and City of Tshwane Electricity
Any system connected to the grid — even one that never feeds power back — must be registered as small-scale embedded generation with your supply authority. Registration needs a compliant inverter, a single-line diagram and your COC. A genuinely off-grid system with no grid connection does not need registration, but still needs a COC.
Municipal fees, timelines and any registration amnesties change regularly. We confirm the current position with Eskom and City of Tshwane Electricity as part of every quote rather than quoting you last year's rules.
How it works in Soshanguve
-
1
Site visit & load assessment
We look at your roof, your board and your actual consumption — not a generic package.
-
2
Written proposal
System size, components, expected output, what it will and will not run, and the full price.
-
3
Installation
Mounting, DC and AC work, board integration and commissioning, usually within two to four days.
-
4
Certification & registration
COC issued, documentation handed over, and SSEG registration prepared where the system is grid-tied.
Solar Installation in Soshanguve — your questions answered
Do I need to register my solar system in Soshanguve?
If it is grid-tied — connected to the supply in any way, even without feeding back — yes. Small-scale embedded generation must be registered with your supply authority, which in Soshanguve is Eskom and City of Tshwane Electricity. Registration requires an electrical COC, a compliant inverter and a single-line diagram. Genuinely off-grid systems with no grid connection do not need SSEG registration, but still need a COC.
Does a solar installation need a Certificate of Compliance?
Yes — every solar installation needs an electrical COC regardless of size, because it is an alteration to your electrical installation. This is also the first document your insurer will ask for after a fire or lightning claim.
What size system do I need?
That comes from your consumption, not your roof. We look at your bills and load profile and size the array, inverter and battery to fit how you actually use power. Most homes in Soshanguve land somewhere between 5 kW and 10 kW, but we would rather measure than guess.
How long does an installation take?
A typical residential system is installed in two to four days on site. The compliance side — COC, documentation and SSEG application — runs alongside and the approval timeline depends on Eskom and City of Tshwane Electricity.
Will solar cover my whole house?
It can, but the honest answer for most properties is that it should not have to. Covering every load including geysers, pool pumps and electric heating gets expensive fast. We normally aim at the loads that give the best return and show you the numbers for going further.
Can you take over a system someone else installed?
Yes, and we are asked to do this often. We inspect what is there, test it, tell you plainly what is wrong and quote the remedial work needed to make it safe, certifiable and registerable.
Other services we provide in Soshanguve
Everything below is available in Soshanguve from the same team, on the same terms.
Electrician
Registered electricians on call across Gauteng
Learn moreResidential Electrician
Home electrical work done safely and signed off properly
Learn moreCommercial Electrician
Electrical contractors for offices, retail and hospitality
Learn moreIndustrial Electrician
Plant, motors and three-phase distribution
Learn moreBackup Power & Inverters
Inverters, batteries and generator changeover
Learn moreElectrical COC Certificate
Inspection, testing and certification by a registered person
Learn moreEmergency Electrician
24-hour callouts for electrical emergencies
Learn moreSolar Installation elsewhere in Gauteng
We cover these areas from the same base, so response times are similar.
Need solar installation in Soshanguve?
Call now for an arrival time, or send the details and we will quote you.